Engineering Test

Product Details
The Facom has exterior friction micrometer with 1/100th mm accuracy. The micrometer has ratchet drum with torque limiter and force applied on the part included strictly between 5 and 10 N.m.
Accuracy is 0.01 mm
Carbide plunger tip is Ø 6.

Product Details Outside Micrometer
Micrometer which is graduated in thousandths, but has an additional series of graduations on the thimble and sleeve which allows readings down to ten - thousandths of an inch or two thousandths of a millimetre.

Product Details Outside Micrometer
Micrometer which is graduated in thousandths, but has an additional series of graduations on the thimble and sleeve which allows readings down to ten - thousandths of an inch or two thousandths of a millimetre.

Product Details Ball Attachments
Micrometer ball attachments enable standard flat anvil micrometers to be adapted to measure concave or curved surfaces, such as tube wall thickness. Will fit most common Mitutoyo, Moore & Wright and Starrett micrometer anvils.

Product Details Mitutoyo 293 Series, IP65
Imperial or Metric reading
Large LCD display
Protected to IP65 for use where coolant may be present
Original setting and Auto power off
Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm Supplied with Batteries, instruction manual and storage case.

Product Details Mitutoyo 293 Series, IP65
Imperial or Metric reading
Large LCD display
Protected to IP65 for use where coolant may be present
Original setting and Auto power off
Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm Supplied with Batteries, instruction manual and storage case.

Product Details Mitutoyo Series 293 QuantuMike Micrometer
Coolant proof micrometer range rated to IP65 that gives a quick responce due to it's spindle design. It's rapid action is backed up by a highly stable frame and heat shield to provide professional results and high accuracy.

Product Details Cast Iron Frames Micrometer
Graduated 0.001in./0.

Product Details Mitutoyo 293 Series, IP65
Imperial or Metric reading
Large LCD display
Protected to IP65 for use where coolant may be present
Original setting and Auto power off
Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm Supplied with Batteries, instruction manual and storage case.

Product Details Mitutoyo Series 293 QuantuMike Micrometer
Coolant proof micrometer range rated to IP65 that gives a quick responce due to it's spindle design. It's rapid action is backed up by a highly stable frame and heat shield to provide professional results and high accuracy.

Product Details Cast Iron Frames Micrometer
Graduated 0.001in./0.

Product Details Mitutoyo Micrometer
The Mitutoyo MDC lite micrometre has a measurement range of 0mm to 25mm. This is high tech, lightweight, digital micrometre. It features the new electromagnetic absolute sensor, improving resistance to environmental conditions such as dirt, oil and water that can cause false readings. It has a measuring range of 0-25.

Product Details Quickmike Absolute
IP54 ingress protection
Non rotating, tungsten carbide tipped measuring faces
Origin setting
Data hold, data output
0-30mm in just 3 thimble revolutions
Accuracy ± 2μm, flatness 0.3μm, parallelism 2μm Supplied with Batteries, instruction manual and storage case.

Product Details Inside Micrometers
Precision manufactured to BS959
Accuracies of 0.01mm/0.0004in.
ranges of 50 to 300mm/2 to 12in.
Each set consists of a micrometer head with locking screw, 10 range identified measuring rods, 12mm/ 1/2in. lapped collar and 2 adjustment spanners
The micrometer has 13mm/ 1/2in. movement graduated (0.01mm/0.001in.

Product Details Mitutoyo 293 Series, IP65
Imperial or Metric reading
Large LCD display
Protected to IP65 for use where coolant may be present
Original setting and Auto power off
Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm Supplied with Batteries, instruction manual and storage case.

Product Details External   Mechanical Features (SPC and Basic model)
Carbide tipped measuring faces
Spindle lock clamp
Ratcher/Friction
Thimble for constant measuring force
Auto power-off after 2 hours
Origin settings
Resolution 0.001mm/0.00005in.

Product Details Cast Iron Frames Micrometer
Graduated 0.001in./0.

Product Details Three Point Internal Micrometer
Professional range of Three-Point Internal Micrometers ideal for accurate and efficient direct measuring of internal diameters.
Ratchet stop.
Setting rings.
Three seperate anvils. Specifications Attribute Value Resolution 0.

Product Details Micrometer
Graduated with an accuracy of 0.001in./0.01mm
Positive spindle lock fitted Supplied with an adjustment spanner Specifications Attribute Value Accuracy ±0.

Product Details Interchangeable Anvil
This digital electronic model has a 0 to 6in./0 to 150mm range with statistical process control (SPC) data output. Each micrometer is supplied with six interchangeable anvils providing the full range in 1in./25mm increments, and five reference standards for user calibration.

Product Details Mitutoyo Micrometer
The Mitutoyo QuantuMike special digital micrometre has a measurement range of 0mm to 25mm with an accuracy ±1μm. This is an innovative device that offers movement 4 times as fast as a standard micrometre. Its rapid action is backed up by a highly stable frame and heat Shield to provide professional results and high accuracy.

Product Details Mitutoyo 293 Series, IP65
Imperial or Metric reading
Large LCD display
Protected to IP65 for use where coolant may be present
Original setting and Auto power off
Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm Supplied with Batteries, instruction manual and storage case.

Product Details Three Point Internal Micrometer
Professional range of Three-Point Internal Micrometers ideal for accurate and efficient direct measuring of internal diameters.
Ratchet stop.
Setting rings.
Three seperate anvils. Specifications Attribute Value Resolution 0.