Test Measurement

Product Details RS PRO Height Measurement Tool, LCD Display, max. measurement 600 mm
Do you need to measure the height of parts quickly and accurately? This RS PRO digital height measurement tool features an easy-to-read LCD with 14 mm digits and a 0.01 mm resolution.

Product Details RS PRO Height Measurement Tool, LCD Display, max. measurement 600 mm
Use this double-column height measurement tool any time you need to determine the height of a component. Offering exceptional levels of accuracy, it's easy to use and comes with a clearly legible digital display.

Product Details RS PRO Vernier Height Gauge, Vernier Display, Maximum Measurement 600 mm
Take precise vertical height measurements with this vernier height gauge from RS PRO. You can use it in a factory or workshop to measure the depth of holes, recesses, slots and steps.
The instrument is made from stainless steel, so it's suitable for harsh industrial use.

Product Details RS PRO Vernier Height Gauge, Vernier Display, max. measurement 300 mm
This Vernier height gauge from the RS PRO series can be used to either accurately measure the height of a component or to mark a specific height on a component.

Made from stainless steel, the gauge is hard-wearing and resistant to corrosion.

Product Details Rectangular Steel gauge Block Sets
Mitutoyo 81 piece gauge block set, made of high-chromium steel with an ultra-micro-lapped surface finish heat treated and aged to give good wear resistance. Excellent inter-set wringing properties. Mitutoyo gauge blocks meet or exceed all known specifications.

Product Details RS PRO Gauge Block Set Alloy Steel Metric, 11 piece
Each gauge block in this 11-piece set from RS PRO is made from high-quality, age-hardened alloy steel. The blocks come in a range of sizes and can be used to calibrate micrometres and calipers up to 250 mm.

Product Details Metric Gauge Block Sets (Grade 1 Inspection)
Manufactured from high quality age hardened alloy steel
Heat treated to HRC65/HV820 for high wear resistance
High quality surface finish
Steel gauges should be cleaned after use to avoid corrosion
Grade 1 inspection Standards BS EN ISO 3650: 1999 Supplied with Full 5-point UKAS Calibration

Product Details RS PRO Gauge Block Set Steel Metric, 87 piece
This gauge block set is an essential tool for precise calibration and measurement, enabling you to obtain the highest degree of accuracy. With the 87 different pieces, which can be used separately or in combination, you can easily determine exact lengths.

Product Details RS PRO Gauge Block Set Steel Metric, 47 piece
Providing the accuracy you need across a broad range of scales, this gauge block set is essential for precise calibration and measurement. It comprises 47 different pieces, which can be used separately or in combination to determine the exact distances between surfaces.

Product Details 1-2-3 Blocks
Blocks supplied in precision ground matched pairs
Each block measures 1 x 2 x 3in
Through hole size is 3//8 UNC clearance (0.377inch)
5 holes on the largest face are tapped 3//8 UNC (The centre and 4 adjacent diagonal holes)
Manufactured from tool steel, hardened to 58-60 Rc.

Product Details 10-Piece Angle Block Set
An angle block set for setting and checking angles in production or inspection areas.,Each block is manufactured from 1//4 in. (6.35mm) thick hardened steel, nominal length 3 inches.,Supplied in a hardwood storage case.

Product Details Kern Analogue Shore Hardness Tester
A compact hand held durometer with drag indicator. Ideal for internal comparison measurement. Supplied in a wooden carrying case for safe and secure storage.

Product Details Sauter Hardness Meter
The Sauter hardness meter is an analogue shore D tester used to test the hardness of different types of material. This tester allows conducting comparison tests quickly and safely for determining the hardness. The different types of penetration depths are known as 'shore'.

Product Details Mitutoyo Hardmatic Durometer
The Mitutoyo hardmatic durometer is a long-leg, analogue dial display durometer in the shore A. The scale can test a range of different materials. This is provided with a peak retaining hand for error-free reading.

Product Details HARDMATIC Durometer
Professional analogue and digital durometers designed to test a range of different materials.
SR44 Battery.

Product Details Sauter Hardness Meter
The Sauter hardness meter is an analogue shore a tester used to test the hardness of different types of material. This tester allows conducting comparison tests quickly and safely for determining the hardness. The different types of penetration depths are known as 'shore'.

Product Details RS PRO Durometer
Evaluate the surface of soft materials quickly and accurately with this hardness tester from RS PRO. Also referred to as a Shore A durometer, it can be used to take hardness measurements in rubber, PVC, elastomers, neoprene and leather.

Product Details RS PRO Durometer
If you're making parts from soft materials and need to test their hardness, this digital Shore A durometer from RS PRO is an ideal solution. It provides quick and reliable hardness measurements for rubber, PVC, elastomers, neoprene and leather.

Product Details RS PRO Durometer
If you're making parts from soft materials and need to test their hardness, this digital Shore A durometer from RS PRO is an ideal solution. It provides quick and reliable hardness measurements for rubber, PVC, elastomers, neoprene and leather.

Product Details Mitutoyo Lever Indicator
The Mitutoyo 513 series horizontal lever indicator has a dial reading of 0-40-0 and a maximum resolution of 0.01mm. It is professional, non-magnetic type measuring instrument that can reach places conventional indicators cannot. The non-magnetic pointer and contact point permit reliable operation even in magnetic environments.

Product Details Mitutoyo Lever Indicator
The Mitutoyo 513 series horizontal lever indicator has a dial reading of 0-70-0 and a maximum resolution of 0.001mm. It is professional, non-magnetic type measuring instrument that can reach places conventional indicators cannot. The non-magnetic pointer and contact point permit reliable operation even in magnetic environments.