GL7-DCO

GL7-DCO

Share:


GL7-DCO

GL7-DCO specification

Item Description
Type of module Analog voltage output module
Model number GL7-DCO
Number of output channels 8 channels
Output connector SMA (Sub-miniature version A) connector
Output method All channels common ground, SMA (Sub-miniature version A) connector
Sampling speed (interval) Up to 100 k Samples/s (10 μs)
Output condition Source of data Measurement data, Edited measurement data, Generated arbitrary data (*1), Generated simple waveform (DC voltage and sine, triangle, ramp, pulse waveform)
Source of measurement data Module of Voltage (GL7-V), Voltage/Temperature (GL7-M), High speed voltage (GL7-HSV), High voltage (GL7-HV), DC strain (GL7-DCB), and Charge (GL7-CHA)
Output condition Signal can be measured by the input module even while the signal is output from the DCO module. Measurement data except the temperature, humidity and logic/pulse are able to output.
Output range Voltage ± 1, 2, 5, 10 V Full Scale
Current Up to ± 10 mA in each channel (total output current of unit is up to 40 mA.)
Output impedance Max. 1 Ω
Output signal accuracy (*2) ±0.25% of Full Scale
D/A converter Resolution 16 bits (effective resolution: 1/20000 of the output full range)
Filter Low pass OFF, Line(1.5 Hz), 5, 50, 500, 5k, 50k Hz
* This filter is the smoothing filter to remove the noise on output of the D/A converter.
External dimensions (W x D x H) Approx. 49 x 136 x 160mm (Excluding projections)
Weight Approx. 770g