Turbo-V 701

Turbo-V 701

Share:


Turbo-V 701

The Turbo-V 701 Navigator pump provides pumping speeds from 510-690 liters/sec (gas dependent), and includes the latest technology offerings in the Navigator line. The pump is optimized for high-compression ratio for low base pressure, high-pressure differential for high-throughput and high foreline pressure. It is designed to be oil-free and contamination free, and to have very low failure rates with the ability to operate in any position without materials stress. Typical MTTF is in excess of 250k hours. Applications for the turbo pumps include high energy physics and research, nanotechnologies, mass spectrometry, industrial vacuum processing, and semiconductors as well as dedicated pumps for Scanning Electron Microscope (SEM) work.
  • Better performance with less power consumption
  • Saves energy while creating less heat, which improves reliability
  • Optimized cooling fins for air-cooling
  • Further improves reliability by lowering operating temperature
  • Lower power requirements with improved tolerable foreline pressure and sustainable throughput
  • Dismountable foreline connector
  • Great versatility in connecting to the forepump
  • Flexibility of cooling choices (air or water)
Tech Specs
Pumping speed CF 10” or ISO 200: N2: 690 l/s He: 620 l/s H2: 510 l/s
Compression ratio N2: 1 x 109 He: 1 x 107 H2: 1 x 106
Base pressure*
(with minimum recommended forepump)
<1 x 10-10 mbar (< 1 x 10-10 Torr)
Inlet flange CF 10” / ISO 200 / ISO 200-F bolted
Foreline flange KF25
Rotational speed 42,000 rpm
Start-up time < 5 minutes
Recommended forepump Mechanical: Varian DS 402
Dry scroll: Varian TS300
Operating position Any
Cooling requirements Natural air convection
Water optional (use water with electrical
conductivity ≤ 500 μS/cm)
Bakeout temperature 120 °C at inlet flange max. (CF flange)
80 °C at inlet flange max. (ISO flange)
Vibration level (displacement) <0.01 μm at inlet flange
<(lbs) kg> ISO flange 19.4 (43.0)
CF flange 25.5 (54.2)
CF and ISO bolted flange 25.5 (54.2)

* According to standard DIN 28 428
 
Ordering Details

Description Weight Kg (Lbs) Part Number
Turbo-V 701 Pump
Complete Systems
   
Turbo-V 701 Navigator complete system, ISO 200 flange 19.0 (43.0) 9698836
Turbo-V 701 Navigator complete system, ISO 200-F bolted flange 25.0 (56.0) 9698843
Turbo-V 701 Navigator complete system, 10 CF flange 25.0 (56.0) 9698837
Complete system includes: Pump, Inlet screen, Controller mounted on the bottom, 2 Mains cables (NEMA plug and European plug).
Pumps    
Turbo-V 701 Navigator pump, ISO 200 16.0 (35.0) 9698926
Turbo-V 701 Navigator pump, ISO 200-F bolted 22.0 (49.0) 9698945
Turbo-V 701 Navigator pump, 10 CF 22.0 (49.0) 9698927
Controllers*    
Turbo-V 701 Navigator controller 120/220 V - 50/60 Hz 3.0 (6.0) 9698977
Turbo-V 700HT Rack controller, 220 V 16.0 (35.0) 9699445
Turbo-V 700HT Rack controller, 110 V 16.0 (35.0) 9699545
Pump Accessories    
Mains cable NEMA plug, 3 m long 0.5 (1.0) 9699958
Mains cable European plug, 3 m long 0.5 (1.0) 9699957
Serial cable and T-plus Software
(previous release Navigator 2.2 included in the CD)
0.5 (1.0) 9699883
Inlet screen DN 200 0.5 (1.0) 9699316
Heater band, 220 V 1.0 (2.0) 9699807
Heater band, 120 V 1.0 (2.0) 9699808
Water cooling kit 0.5 (1.0) 9699337
Plastic water cooling kit 0.5 (1.0) 9699347
Air cooling kit for use with Navigator controller 5.0 (10.0) 9699339
Air cooling kit for use with standard rack controller 3.0 (7.0) 9699314
Bracket for Navigator controller side mounting 2.0 (4.0) 9699349
Vibration damper, ISO 200 5.0 (10.0) 9699346
Vibration damper, CF 10 5.0 (10.0) 9699336
Vent flange, NW 10 KF / M8 0.5 (1.0) 9699108
Vent device with adjustable delay time for standard rack controller 2.0 (4.0) 9699831
Vent valve for standard rack controller 2.0 (4.0) 9699843
Vent valve for Navigator controller 2.0 (4.0) 9699834
Purge valve 10 SCCM NW16KF M12 0.2 (0.5) 9699239
Purge valve 10 SCCM 1 4 Swagelok M12 0.2 (0.5) 9699240