ELSO Technologies Sdn Bhd
8E, First Floor,
Jalan Tun Dr. Awang,
Bukit Jambul,
11900 Bayan Lepas,
Penang, Malaysia.

Mr Loo (General Manager)
+6016-713 5255

Johor Branch
Lake View Apartment,
Jalan Austin Perdana 1,
Taman Austin Perdana,
81100 Johor Bahru,
Johor, Malaysia.

Chong CW (Sales Manager)
(WhatsApp or whatsapp call only) Oversea trip from
2/12 – 11/12/2019


Selangor Branch
Puchong, Selangor.

Glenys Teoh (Sales Manager)

East Malaysia Branch
Lot 35, Lot 5277,
Lorong 9C1, Jalan Kapor,
93150 Kuching,
Sarawak, Malaysia.

Clement Lau (Sales Engineer)

ELSO Technologies Pte Ltd
Singapore Branch

1 Coleman Street
#10-06 The Adelphi
179803 Singapore.

Chew Peng Seng  (Sales Manager)
+65 9663 8176

Turbo-V 2300 TwisTorr

Previous 18 / 20 Next

Turbo-V 2300 TwisTorr Turbo Pumps Agilent Technologies

The Turbo-V 2300 TwisTorr pump offers the highest pumping speeds in its category for N2. Utilizing leading-edge Twistorr technology, the pump achieves higher compression ratios for light gases in a commercially available turbo molecular pump. The pump is designed for scientific and research applications and is operated with a dedicated full display rack controller. Due to high foreline pressure tolerance, the pump may be backed by a smaller, cost-effective dry scroll pump like the Agilent TS600.


  • The Turbo-V 2300 solution comprises a stand-alone pump and rack-type display controller unit
  • Advanced rotor design in combination with TwisTorr technology reduces the number of pumping stage
  • Our unique monolithic rotor reduces material stress and improves assembly tolerances
  • Electrical motor reduces start-up time and improves pump stability under changing gas load conditions
  • Higher vacuum performance with lower heat dissipation
  • Advanced water cooling system
  • Optimized air cooling system
  • Clean maintenance-free vacuum
  • Utilizes Agilent's T-plus Software
  • Typical Turbo Pump Applications

Technical Specifications
Vacuum Performances
Pumping speed for N2 (*) 2050 l/s
Pumping speed for He (*) 1800 L/s
Pumping speed for H2 (*) 1500 L/s
Compression ratio for N2 >8 x 108
Compression ratio for He 8 x 105
Compression ratio for H2 4 x 104
Base pressure* (with recommended forepump) 10-10 mbar (7.5 x 10-11 Torr) (**)
Inlet Flange ISO 250F, CFF 12” O.D.
Foreline flange KF 40 NW
Nominal rotational speed 33300 rpm
Start-up time without gas load and with the recommended forepump < 6 minutes
Minimum recommended forepump TriScroll 600
Operational position Any
Operating ambient temperature +5 °C to +35 °C
Bakeout temperature 120°C (CFF), 80°C (ISO)
Max rotor temperature 120 °C
Vibration level (displacement) < 0.01 μm at inlet flange
Lubricant Permanent lubrication
Cooling requirements Water
Coolant water Recommended flow: 200 l/h
Temperature: +15 °C to +30 °C
Pressure: 3 to 5 bar (45 to 75 psi)
Noise level <60 dB(A) at 1 meter
Storage temperature -20°Cto+70°C
Environment protection IP54
Weight kg (lbs) ISO 250: 54.2 (119.5) CF 12”: 55.3 (121.9)
(*): According to standard DIN 28 428, the base pressure is that measured in a leak-free test dome, 48 hours after the completion of test dome bake-out, with a Turbopump fitted with a CFF flange and using the recommended pre-vacuum pump
Controller Specifications 100, 120, 220, 240 Vac, 1-phase
Input voltage 50 - 60 Hz
Input frequency 1300 VA
Maximum input power 64 Vac
Output voltage 555 Hz
Output frequency 560 W maximum
Output Power starting 450 W maximum
Output Power normal 12,5 kg (28 lbs)
Weight (both models) II
Installation category 2
Pollution degree 100, 120, 220, 240 Vac, 1-phase

Outline Drawing
Turbo-V 2300 TwisTorr Outline Drawing

Ordering Details:

Part Numbers:
Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
Ship to Name  
Shipping Address  

Switch to Mobile Version
available in