ELSO Technologies Sdn Bhd
8E, First Floor,
Jalan Tun Dr. Awang,
Bukit Jambul,
11900 Bayan Lepas,
Penang, Malaysia.
+604-6301166
+604-6301167
+604-6301168
sales@elsotech.com

Mr Kwang (General Manager)
+6016-422 8644
 
+60164228644

Johor Branch
Lake View Apartment,
Jalan Austin Perdana 1,
Taman Austin Perdana,
81100 Johor Bahru,
Johor, Malaysia.

Chong CW (Sales Manager)
+6012-4767747
cwchong@elsotech.com

Selangor Branch
Puchong, Selangor.

Glenys Teoh (Sales Manager)
+6018-2810168
glenysteoh@elsotech.com

East Malaysia Branch
Lot 35, Lot 5277,
Lorong 9C1, Jalan Kapor,
93150 Kuching,
Sarawak, Malaysia.

Clement Lau (Sales Engineer)
+6019-8497663
clementlau@elsotech.com

ELSO Technologies Pte Ltd
Singapore Branch

1 Coleman Street
#10-06 The Adelphi
179803 Singapore.

Chew Peng Seng  (Sales Manager)
+65 9663 8176
pengseng@elsotech.com

Turbo-V 2300 TwisTorr

Previous 15 / 17 Next

Turbo-V 2300 TwisTorr Turbo Pumps Agilent Technologies


The Turbo-V 2300 TwisTorr pump offers the highest pumping speeds in its category for N2. Utilizing leading-edge Twistorr technology, the pump achieves higher compression ratios for light gases in a commercially available turbo molecular pump. The pump is designed for scientific and research applications and is operated with a dedicated full display rack controller. Due to high foreline pressure tolerance, the pump may be backed by a smaller, cost-effective dry scroll pump like the Agilent TS600.

Features

  • The Turbo-V 2300 solution comprises a stand-alone pump and rack-type display controller unit
  • Advanced rotor design in combination with TwisTorr technology reduces the number of pumping stage
  • Our unique monolithic rotor reduces material stress and improves assembly tolerances
  • Electrical motor reduces start-up time and improves pump stability under changing gas load conditions
  • Higher vacuum performance with lower heat dissipation
  • Advanced water cooling system
  • Optimized air cooling system
  • Clean maintenance-free vacuum
  • Utilizes Agilent's T-plus Software
  • Typical Turbo Pump Applications

Technical Specifications
Vacuum Performances
Pumping speed for N2 (*) 2050 l/s
Pumping speed for He (*) 1800 L/s
Pumping speed for H2 (*) 1500 L/s
Compression ratio for N2 >8 x 108
Compression ratio for He 8 x 105
Compression ratio for H2 4 x 104
Base pressure* (with recommended forepump) 10-10 mbar (7.5 x 10-11 Torr) (**)
Inlet Flange ISO 250F, CFF 12” O.D.
Foreline flange KF 40 NW
Other
Nominal rotational speed 33300 rpm
Start-up time without gas load and with the recommended forepump < 6 minutes
Minimum recommended forepump TriScroll 600
Operational position Any
Operating ambient temperature +5 °C to +35 °C
Bakeout temperature 120°C (CFF), 80°C (ISO)
Max rotor temperature 120 °C
Vibration level (displacement) < 0.01 μm at inlet flange
Lubricant Permanent lubrication
Cooling requirements Water
Coolant water Recommended flow: 200 l/h
Temperature: +15 °C to +30 °C
Pressure: 3 to 5 bar (45 to 75 psi)
Noise level <60 dB(A) at 1 meter
Storage temperature -20°Cto+70°C
Environment protection IP54
Weight kg (lbs) ISO 250: 54.2 (119.5) CF 12”: 55.3 (121.9)
(*): WITHOuT INLET SCREEN
(*): According to standard DIN 28 428, the base pressure is that measured in a leak-free test dome, 48 hours after the completion of test dome bake-out, with a Turbopump fitted with a CFF flange and using the recommended pre-vacuum pump
Controller Specifications 100, 120, 220, 240 Vac, 1-phase
Input voltage 50 - 60 Hz
Input frequency 1300 VA
Maximum input power 64 Vac
Output voltage 555 Hz
Output frequency 560 W maximum
Output Power starting 450 W maximum
Output Power normal 12,5 kg (28 lbs)
Weight (both models) II
Installation category 2
Pollution degree 100, 120, 220, 240 Vac, 1-phase

Outline Drawing
Turbo-V 2300 TwisTorr Outline Drawing

Ordering Details:

Part Numbers:
9696000
9696001
X3501-64004
X3501-68003
Please leave your enquiry here, we will reply as soon as possible.
Name*  
Company Name  
Product Interested  
Quantity  
Email*  
Contact No.*  
Ship to Name  
Shipping Address  
Messages*  
   

Switch to Mobile Version
available in