Miniature Pump

Miniature Pump

Share:


Miniature Pump

Features

  • Pump has a diode configuration and provides approximately 0.4 l/s of nitrogen pumping speed
  • Pumps can be customized with different high-voltage feedthroughs, body geometries, and pumping cell arrangements.
  • The 2 l/s Miniature VacIon pump has been modified to enhance starting at low pressure.
  • The 10 l/s Miniature VacIon pump is highly efficient for dealing with residual gases such as hydrogen.

Technical Specifications


Input 90 to 130 VAC or 180 to 240 VAC or 24 VDC
Output Voltage: ± 5000 VDC (open load)
Current: 15 mA (short circuit)
Maximum Power: 21 W (3 kV at 7 mA)
Front Panel HV ON, HIGH LOAD, and POLARITY LEDs
LED bargraph linear scale for current and voltage indication
Recorder Output 0 to +10 VDC linear proportional to current
(10 V = 10 mA)
Safety Marks CE, cCSAus
Conformity to Norms Safety: EN61010-1
EMI/EMC: EN61000-4-2, EN61000-4-3, EN61000-4-4
Rear Panel

Nine pin “D” type connector with following available signals and commands Recorder outputs:

  • 0 to +5 VDC, linear proportional to HV (1 V = 1 kV)
  • 0 to +10 VDC, linear proportional to current (10 V = 10 mA)
  • 0 to +10 VDC, linear proportional to current (10 V= 1 mA)

HV ON confirm signal: Contact rating – 1 A at 250 VAC; 0.2 A at 30 VDC
Remote HV ON/OFF (interlock) command
HV connector: Fischer type 105 or King type, 10 kV

 

Ordering Details



Outline Drawing


Input 90 to 130 VAC or 180 to 240 VAC or 24 VDC
Output Voltage: ± 5000 VDC (open load)
Current: 15 mA (short circuit)
Maximum Power: 21 W (3 kV at 7 mA)
Front Panel HV ON, HIGH LOAD, and POLARITY LEDs
LED bargraph linear scale for current and voltage indication
Recorder Output 0 to +10 VDC linear proportional to current
(10 V = 10 mA)
Safety Marks CE, cCSAus
Conformity to Norms Safety: EN61010-1
EMI/EMC: EN61000-4-2, EN61000-4-3, EN61000-4-4
Rear Panel

Nine pin “D” type connector with following available signals and commands Recorder outputs:

  • 0 to +5 VDC, linear proportional to HV (1 V = 1 kV)
  • 0 to +10 VDC, linear proportional to current (10 V = 10 mA)
  • 0 to +10 VDC, linear proportional to current (10 V= 1 mA)

HV ON confirm signal: Contact rating – 1 A at 250 VAC; 0.2 A at 30 VDC
Remote HV ON/OFF (interlock) command
HV connector: Fischer type 105 or King type, 10 kV

 
Miniature Ion Pump 180 Degree Config Outline Drawing
Miniature Ion Pump 90 Degree Config Outline Drawing