ELSO Technologies Sdn Bhd
8E, First Floor,
Jalan Tun Dr. Awang,
Bukit Jambul,
11900 Bayan Lepas,
Penang, Malaysia.

Mr Kwang (General Manager)
+6016-422 8644

Johor Branch
Lake View Apartment,
Jalan Austin Perdana 1,
Taman Austin Perdana,
81100 Johor Bahru,
Johor, Malaysia.

Chong CW (Sales Manager)
(WhatsApp or whatsapp call only) Oversea trip from
2/12 – 11/12/2019


Selangor Branch
Puchong, Selangor.

Glenys Teoh (Sales Manager)

East Malaysia Branch
Lot 35, Lot 5277,
Lorong 9C1, Jalan Kapor,
93150 Kuching,
Sarawak, Malaysia.

Clement Lau (Sales Engineer)

ELSO Technologies Pte Ltd
Singapore Branch

1 Coleman Street
#10-06 The Adelphi
179803 Singapore.

Chew Peng Seng  (Sales Manager)
+65 9663 8176

MX0109A InfiniiMax III 26 GHz Extreme Temperature Solder-in Head

Previous 14 / 50 Next

MX0109A InfiniiMax III 26 GHz Extreme Temperature Solder-in Head  Oscilloscope Probes  Keysight Technologies

Key Features & Specifications

  • 26 GHz bandwidth (with InfiniiMax III N2803A amp)
  • Cdiff = 108 fF, Cse = 140 fF
  • 100kΩ input Rdiff (@ DC), 1kΩ input Rdiff (@ >10kHz)
  • 6:1 attenuation ratio, normal sensitivity
  • Variable spacing from 5 mil – 250 mil (or 0.127 mm – 6.35 mm)
  • Extreme operating temperature of -55 °C to +150 °C per JEDEC JESD22-A104 revision E


The MX0109A InfiniiMax III extreme temperature solder-in head is a semi-permanent solder-in connection that provides up to 26 GHz of system bandwidth. For extended temperature testing, the MX0109A supports extreme operating temperature of -55 °C to +150 °C per JEDEC JESD22-A104 revision E, making it ideal for testing electronics circuits and devices in environmental chambers.

  • Compatible with InfiniiMax III and III+ probe amp
  • The 130 ohm axial resistors at the tip of the MX0109A ZIF tip can be replaced when they are worn out or damaged.
  • The replacement axial resistor kit for the MX0109A, N2836A and N2838A is N2836-68701. Each resistor kit contains 10 resistors.
  • Operating temperature characteristics
    • -55°C dwell, 1000 hours minimum
    • +150°C dwell, 1000 hours minimum
    • -55°C to 150°C cycles, 750 cycles minimum per JEDEC JESD22-A104 revision E
  • Use the N5450B extreme temperature extension cable to extend the cable length inside the chamber.

Please leave your enquiry here, we will reply as soon as possible.
Company Name  
Product Interested  
Contact No.*  
Ship to Name  
Shipping Address  

Switch to Mobile Version
available in